MECHANICAL ENGINEERING
Academic Year 2023-2024
1. Ahmed Syed Amjad, and Bibin John. “Prediction of pressure gradient and hold-up in horizontal liquid-liquid pipe flow.” Petroleum Science 20, no. 6 (2023): 3766-3782.
2. Amjath Z. A., R. Ganesa Moorthy, V. Mohanavel, and A. H. Seikh. “Effect of Sugarcane Bagasse Ash on AA7075 alloy based composites prepared through stir casting route.” Surface Review and Letters (2024).
Academic Year 2022-2023
1. Chaturvedi, Mukti, Arungalai Vendan Subbiah, Mohammed Y. Tharwan, Sharaf Al Sofyani, Vladimir Kachinskiy, Sharanabasavaraj Radder, Ashraff Ali Kaveripakkam Suban, Essmat Showman, M. Fattouh, and Ammar H. Elsheikh. “Welding of low carbon steel tubes using magnetically impelled arc butt welding: Experimental investigation and characterization.” Metals 12, no. 11 (2022): 1965.
Academic Year 2021-2022
1. Reddy, R. Pavan Kumar, M. Prabhu, and K S Ashraff Ali. “A review on investigation of compressive load and buckling load on composite pipe for windmill application.” Materials Today: Proceedings 51 (2022): 1026-1029.
2. K. S. Ashraff Ali, M.M. Ravikumar, J. Mohammed, Naeim Farouk, V. Mohanavel, M. Ravichandran,” Investigation of Ku band microwave absorption of three-layer BaFe12O19 carbon-fiber@Fe3O4 and grapheme @ BaFe12O19@Fe3O4 composite” Journal of Alloys and compounds (2021):161045
3. Sathish, T., S. Tharmalingam, V. Mohanavel, K. S. Ashraff Ali, Alagar Karthick, M. Ravichandran, and Sivanraju Rajkumar. “Weldability investigation and optimization of process variables for TIG-welded aluminium alloy (AA 8006).” Advances in Materials Science and Engineering 2021 (2021): 1-17.
4. Ramanujam, N., S. Muthukumaran, B. Nagesawara Rao, M. Ramarao, Amol L. Mangrulkar, K. S. Ashraff Ali, L. Pugazhendhi, and Mebratu Markos. “Experimental investigations on mechanical properties of AZ31/eggshell particle-based magnesium composites.” Advances in Materials Science and Engineering 2022 (2022).
5. Ali Kaveripakkam Suban Ashraff, Vinayagam Mohanavel, Subbiah Arungalai Vendan, Manickam Ravichandran, Anshul Yadav, Marek Gucwa, and Jerzy Winczek. “Mechanical and microstructural characterization of friction stir welded SiC and B4C reinforced aluminium alloy AA6061 metal matrix composites.” Materials 14, no. 11 (2021): 3110.
6. Sreenivasulu, A., K. S. Ashraff Ali, P. Arumugam, Shaik Rahamat Basha, P.Velmurugan, S. Rajkumar, and S. Suresh Kumar. “Investigation on thermal properties of tamarind shell particles reinforced hybrid polymer matrix composites.” Materials Today: Proceedings 59 (2022): 1305-1311.
7. Pattusamy, Vijayavel, Rajkumar Ilamurugan, Magudeeswaran Govindaraj, and Ananthakumar Kasi. “Effect of tool diameter ratio on the microstructural characteristics of a solid-state processed aluminum based metal matrix composite.” Materials Testing 63, no. 7 (2021): 668-675.
Academic Year 2020-2021
1. Kumar D, Kiran Shahapurkar, Venkatesh C, Muruganandhan R, Vineet Tirth, Chandru
Manivannan, Ibrahim M. Alarifi, Manzoore Elahi M. Soudagar, A.S. El-Shafay 2021
‘Influence of Graphene Nano Fillers and Carbon Nano Tubes on the Mechanical and
Thermal Properties of Hollow Glass Microsphere Epoxy Composites’, Processes Journal,
vol. 10, no. 1, 40; pp. 1-14.
2. Mohanavel, V., K. S. Ashraff Ali, S. Prasath, and T. Sathish. “Microstructural and
tribological characteristics of AA6351/Si3N4 composites manufactured by stir
casting.” Journal of Materials Research and Technology 9, no. 6 (2020): 14662-14672.
3. K. S. Ashraff Ali, D. Joseph Manuel, M. Balamurugan, and M. Sangili Murugan.
“Analysis of composite leaf spring using ANSYS software.” Materials Today:
Proceedings (2020).
4. K. S. Ashraff Ali, S. Suresh Kumar, J. Allen Jeffrey, M.M. Ravikumar and S. Rajkumar
“An insight into stress and strain analysis over on hexagonal aluminium sandwich
honeycomb with various thickness glass fiber face sheets” Materials Today:
Proceedings (2021) 493-499.
5. V. Mohanavel, K.S. Ashraff Ali, K. Ranganathan, J. Allen Jeffrey, M.M. Ravikumar
and, S. Rajkumar “The roles and applications of additive manufacturing in the aerospace
and automobile sector” Materials Today: Proceedings (2021) 405-409.
6. J. Allen Jeffrey, M.M. Ravikumar, K. S. Ashraff Ali, R. Vishnu Kumar, S. Rajkumar, L.
Pugazhendhi “Tensile and Flexural Properties of Natural Fibre Matrix Composites
Developed Through Hand-Lay Method” Materials Today: Proceedings (2021) 400-404.
7. Paidar, M., K.S Ashraff Ali, O. O. Ojo, V. Mohanavel, J. Vairamuthu, and M.
Ravichandran. “Diffusion brazing of Inconel 617 and 321 stainless steel by using AMS
4772 Ag interlayer.” Journal of Manufacturing Processes 61 (2021): 383-395.
8. Paidar, M., K. S. Ashraff Ali, V. Mohanavel, S. Mehrez, M. Ravichandran, and O. O.
Ojo. “Weldability and mechanical properties of AA5083-H112 aluminum alloy and pure
copper dissimilar friction spot extrusion welding-brazing.” Vacuum (2021): 110080.
9. K. S. Ashraff Ali, V. Mohanavel, C. Gnanavel, V. Vijayan, and N. Senthilkumar.
“Structural and optical behavior of SnS 2/NiFe2O4 NCs prepared via novel two-step
synthesis approach for MB and RhB dye degradation under sun light
irradiation.” Research on Chemical Intermediates (2021): 1-14.
10. Mohanavel, V., M. Ravichandran, K.S Ashraff Ali, and A. Praveen Kumar. “Mechanical
Properties of AA7050/Coconut Shell Ash Composites Manufactured via Stir Casting
Technique.” In Advances in Lightweight Materials and Structures, pp. 301-307. Springer,
Singapore, 2020.
11. K. S. Ashraff Ali, S. Mehrez, O. O. Ojo, V. Mohanavel, K. Yoganandam, and M.
Ravichandran. “Modified Friction Stir Clinching of AA5754-O to AA6061-T6: The role
of shoulder feature on the metallurgical and mechanical properties.” Vacuum (2021):
110109.
12. Munimathan, Arunkumar, Mohanavel Vinayagam, Prabhu Rajalingam, Ganesamoorthy
Raju, and Suban Ashraff Ali Kaveripakkam. “Performance and impact of cryogenic
pulsating heat pipe using a different number of turns and helium gas.” Thermal
Science 26, no. 2 Part A (2022): 921-929.
13. Ali, KS Ashraff, V. Mohanavel, M. Ravichandran, S. Arungalai Vendan, T. Sathish, and
A. Karthick. “Microstructure and mechanical properties of friction stir welded SiC/TiB 2
reinforced aluminum hybrid composites.” Silicon (2021): 1-11.
14. Parasuraman, Prabhuraj, Rajakumar Selvarajan, Balasubramanian Visvalingam,
Rajkumar Ilamurugan, and Kavitha Subramanian. “Stir zone stress corrosion cracking
behavior of friction stir welded AA7075-T651 aluminum alloy joints.” Corrosion
Reviews 39, no. 1 (2021): 55-62.
15. Vijayavel, P., Sundararajan, T., Rajkumar, I., & Ananthakumar, K. (2021). Effect of
tool diameter ratio of tapered cylindrical profile pin on wear characteristics of friction stir
processing of Al-Si alloy reinforced with SiC ceramic particles. Metal Powder
Report, 76(2), 75-89.
16. Vijayavel, P., I. Rajkumar, and T. Sundararajan. “Surface characteristics modification of
lm25 aluminum alloy–5% sic particulate metal matrix composites by friction stir
processing.” Metal Powder Report 76, no. 3 (2021): 140-151.
17. Ahmed Syed Amjad, and Bibin John. “Dimensionless parameters to identify transition
from stratified to non-stratified flow pattern in liquid–liquid horizontal pipe flow.” Flow,
Turbulence and Combustion 107, no. 3 (2021): 653-681.
18. Ahmed Syed Amjad, and Bibin John. “Predictive correlations for heat transfer
characteristics of oil-water horizontal pipe flow-an experimental study.” Journal of
Petroleum Science and Engineering 204 (2021): 108733.
19. Javeed Abdul Hakeem, and Bibin John. “Tribological performance of nanolubricants
dispersed with graphene oxide and detonation nanodiamond.” Proceedings of the
Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235, no. 9
(2021): 1937-1949.
20. Javeed Abdul Hakeem, Bibin John, and Anil Payyappali Mana. “Tribological
performance of engine oil with graphene oxide nano additives on cylinder liner honing
surface at high contact pressure.” Materials Today: Proceedings 45 (2021): 4008-4011.
Academic Year 2019-2020
1. Kumar D, Muruganandhan R, Thirumavalavan K 2020, ‘Optimization of Mechanical
and Thermal Properties of Bio-Waste Horn Powder Reinforced Phenol Formaldehyde
Composites’, Interciencia Journal, vol. 45, no. 1, pp. 263-280.
2. P. Vijayavel a, K. Ananthakumar b, I. Rajkumar c, T. Sundararajan 2021, ‘Influences
of tool velocity ratio on wear behavior of friction stir processed LM25AA-5%SiCp metal
matrix composite’ Metal Powder Report , Vol.76, Supplement
1, December 2021, pp.S39-S49
3. K. S. Ashraff Ali, R. Ravichandran, S. Mohan Raj, M. Raman and V. Mohanavel. “
Bobbin friction stir welding of Al-12% TiB2 In-suit metal matrix composites on
mechanical and metallurgical aspects.” Journal of Balkan tribological Association
(2020): vol ;26, pp:158-169
4. Ashraff Ali, K. S., R. Nirmal Kumar, Z. A. Amjath, and Mohanavel Vinayagam.
“Emission investigation on the effect of ultrasonic irradiation in neat biodiesel fuelled
engine.” International Journal of Ambient Energy (2020): 1-5
5. Rajan, K., M. Rajaram Narayanan, K. S. Ashraff Ali, B. Prasanna, and Mohanavel
Vinayagam. “Analysis on the properties and emission characteristics of corn biodiesel
subjected to improved transesterification.” International Journal of Ambient
Energy (2020): 1-6
6. Ashraff Ali, K. S., C. Ramakrishnan, R. Parthasarathi, C. Inigo, and Mohanavel
Vinayagam. “Emission examination of lemongrass biodiesel and novel nanoparticle
blends in research diesel engine.” International Journal of Ambient Energy (2020): 1-5
Academic Year 2018-2019
1. R. Nirmal Kumar, K. Matheeur Rahman, P. Mohamed Shadab Ather, TL Mohamed Sufiyan, and S. Mohammed Shuaib. “Performance and Emission Analysis on Modified Pent Roof Combustion Chamber (6º) in a Diesel Engine.” American International Journal of Research in Science, Technology, Engineering & Mathematics: (2019) 128
2. Ahmed, Syed Amjad, and Bibin John. “Liquid–Liquid horizontal pipe flow–A review.” Journal of Petroleum Science and Engineering 168 (2018): 426-447.
- Mr. R. Gopinathan, Mr. Z. A. Amjath, “Design and Analysis of Roll Cage for an all Terrain Vehicle”, AIMS, 2018.
- Mr. R. Gopinathan, Mr. Z. A. Amjath, “Design and Fabrication of Transmission system for an All Terrain Vehicle”, AIMS, 2018.
- R. Ravichandran ,”CFD Analysis of heat transfer augmentation using tapered width twisted tape inserts”, AIMS, 2014-2015.
- D. Kumar, “Experimental characterization, modeling and dynamic analysis of horn fibre reinforced brake pad”, AIMS, 2014-2015.
- D. Kumar , “Optimization of mechanical & electrical properties of horn fiber reinforced epoxycomposites”, AIMS, 2014-2015.
- T. SampathKumar, ”Performance evaluation of machining process by using PVD tri layer coated and uncoated tools”, AIMS, 2014-2015.
- N.Tamiloli , “Structural analysis of multiforce optimization of machining parameters by using PCA”, AIMS, 2014-2015.
- N.Tamiloli , “Structural and thermal analysis of milling insert AXMT 0903 using FEA” , AIMS, 2014-2015.
- N.Tamiloli ,”vibration analysis in end milling using fast Fourier transform”, AIMS, 2014-2015
2. I. Rajkumar, ‘Effect Of Tool Rotational Speed On Wear Behaviour Of Friction Stir Processed (Lm25 Aluminium Alloy- 5% Sicp) Metal Matrix Composites’ International Conference, IWS & WRI, International Welding Symposium November 2018.
3. I. Rajkumar, ‘Optimization of friction stir process parameters to attain maximum hardness and stirzone area of AI- MMC’ International Conference, ICOMACE-2018, K.G. Reddy College of Engineering and Technology, Hyderabad December-2018.
4. R. Senthil “Synthesis, Characterization and properties of stir cast AA2017-Aluminium Nitride (AIN) composites” VNCPAAM, 2023.
5. Nirmal Kumar R “Performance and emission analysis on modified pent roof combustion chamber (6 degree) fueled with hydrogen in IC engines” ICETET, 2023.
7. Nirmal Kumar R “Experimental investigation and energy analysis of di diesel engine enriched with hydrogen intake with varying flow rate” ICFMEM, 2023.
8. Ahmed, Syed Amjad, “A Numerical Investigation of Two-Dimensional Solid Oxide Fuel Cell (SOFC) ” Chem. Tech, 2024.
FACULTY TRAINING PROGRAMME
| Sl. No | Faculty Name | Nature of the Program | Duration | Organized By |
| ACADEMIC YEAR 2018-19 | ||||
| 1 | R. Senthil,
Asst Professor R. Nirmal Kumar Asst Professor | Vehicle Dynamics Using MAT Lab(FDP) | 27.11.18 to 01.12.18 | Sri Venkateswara College Of Engineering, Sriperumbudur |
| 2 | Dr. D. Kumar(Asso Professor) | Work shop-3D Printing technology | 05.10.18
to 06.10.18 | CAHCET Associated with CAE CENTRE, Chennai |
| Syed Amjad Ahmed (Asso Professor) | ||||
| R. Ravichandran(Asso Professor) | ||||
| I. Raj Kumar(Asso Professor) | ||||
| R. Uma Mageshwaran(Asst Professor) | ||||
| R. Senthil(Asst Professor) | ||||
| Z.A. Amjath(Asst Professor) | ||||
| R. Nirmal Kumar(Asst Professor) | ||||
| V. B. Mohammed Fayas(Asst Professor) | ||||
| P. Hemanathan(Asst Professor) | ||||
| C. Kumaran(Asst Professor) | ||||
| R.Gopinathan (Asst Professor) | ||||
| M.A. Mahoob Durai(Asst Professor) | ||||
| C. Md Rizwan(Asst Professor) | ||||
| N. Thirugnanasambanthan(Asst Professor) | ||||
| A. Shabeer(Asst Professor) | ||||
| T. Rajasekar(Asst Professor) | ||||
| 3 | Dr. D. Kumar(Asso Professor) | Two Day Hands on Training Program on Robotics | 28.12.18 to 29.12.18 | CAHCET |
| Syed Amjad Ahmed (Asso Professor) | ||||
| R. Ravichandran(Asso Professor) | ||||
| I. Raj Kumar(Asso Professor) | ||||
| T. Sankar (Asso Professor) | ||||
| R. Uma Mageshwaran(Asst Professor) | ||||
| R. Senthil(Asst Professor) | ||||
| Z.A. Amjath(Asst Professor) | ||||
| R. Nirmal Kumar(Asst Professor) | ||||
| V. B. Mohammed Fayas(Asst Professor) | ||||
| P. Hemanathan(Asst Professor) | ||||
| C. Kumaran(Asst Professor) | ||||
| R.Gopinathan (Asst Professor) | ||||
| M.A. Mahoob Durai(Asst Professor) | ||||
| C. Md Rizwan(Asst Professor) | ||||
| N. Thirugnanasambanthan(Asst Professor) | ||||
| A. Shabeer(Asst Professor) | ||||
| T. Rajasekar(Asst Professor) | ||||
| 4 | Dr. D. Kumar(Asso Professor) | Workshop-Automotive Technology | 08.02.19 to 09.02.19 | CAHCET Associated with GOODWIN MOTORS, Chennai |
| Syed Amjad Ahmed (Asso Professor) | ||||
| R. Ravichandran(Asso Professor) | ||||
| I. Raj Kumar(Asso Professor) | ||||
| T. Sankar (Asso Professor) | ||||
| R. Uma Mageshwaran(Asst Professor) | ||||
| R. Senthil(Asst Professor) | ||||
| Z.A. Amjath(Asst Professor) | ||||
| R. Nirmal Kumar(Asst Professor) | ||||
| V. B. Mohammed Fayas(Asst Professor) | ||||
| P. Hemanathan(Asst Professor) | ||||
| C. Kumaran(Asst Professor) | ||||
| R.Gopinathan (Asst Professor) | ||||
| M.A. Mahoob Durai(Asst Professor) | ||||
| C. Md Rizwan(Asst Professor) | ||||
| N. Thirugnanasambanthan(Asst Professor) | ||||
| A. Shabeer(Asst Professor) | ||||
| T. Rajasekar(Asst Professor) | ||||
| 5 | Dr. D. Kumar | Nanotechnology: A Maker’s Course | 13.5.19 to 4.7.19 | Duke NC State University |
| 6. | I. Rajkumar | NPTEL -Surface Engineering for Corrosion and Wear Resistance Application | Jan to Apr 2019 | IIT Kharagpur |
Academic Year : 2017-18
| S. No | Faculty Name | Nature of the Program | Duration | Organized By |
| ACADEMIC YEAR 2017-18 | ||||
| 1 | Dr. D. Kumar(Asso Professor) | FDP-Active Learning | 21.04.18 to 22.04.18 | CAHCET |
| Syed Amjad Ahmed (Asso Professor) | ||||
| R. Ravichandran(Asso Professor) | ||||
| I. Raj Kumar(Asso Professor) | ||||
| T. Sankar (Asso Professor) | ||||
| R. Uma Mageshwaran(Asst Professor) | ||||
| R. Senthil(Asst Professor) | ||||
| Z.A. Amjath(Asst Professor) | ||||
| R. Nirmal Kumar(Asst Professor) | ||||
| V. B. Mohammed Fayas(Asst Professor) | FDP- Active Learning | 21.04.18 to 22.04.18 | CAHCET | |
| P. Hemanathan(Asst Professor) | ||||
| C. Kumaran(Asst Professor) | ||||
| R.Gopinathan (Asst Professor) | ||||
| M.A. Mahoob Durai(Asst Professor) | ||||
| C. Md Rizwan(Asst Professor) | ||||
| N. Thirugnanasambanthan(Asst Professor) | ||||
| A. Shabeer(Asst Professor) | ||||
| T. Rajasekar(Asst Professor) | ||||
| 2 | Syed Amjad Ahmed | MOOC course -Advanced Transport Phenomena | OCT 2017
to JAN 2018 | Delft University of Technology Netherlands
www.edx.org |
Academic Year : 2016-17
| S. No. | Faculty Name | Nature of the Program | Duration | Organized By |
| 1. | Mr. Z.A. Amjath
Assistant Professor | FDP on Engineering Mechanics using MATLAB | 14.12.2016 to 20.12.2016 | Rajalakshmi Engineering College, Thandalam, Chennai. |
List of Patents Registered
1. K.S. Ashraff Ali, “A Device For Analysing The Various Parameters Associated With
Vehicle Along With Accident Alert System” Patent Application no: 201941051423
(20/12/2019)
2. K.S. Ashraff Ali, “A System And Method For Monitoring And Processing Wastewater
and Water Harvesting in Formal Habitation” Patent Application no: 201941036236A
(20/09/19)
3. R. Nirmal Kumar, “Low Cost Device For Measurement Transport Properties of Pores
Materials” Patent Application no: 202041054231 (18.12.2020)
4. D. Kumar, “Solar & Wind Powered Electric Vehicle” Patent Application no:
397352001 (11.10.2023)
5. D. Kumar, “Solar Powered Glass Cleaning Robot” Patent Application no: 3972222001
(08.08.2023)
STUDENTS ACHIEVEMENTS
Academic Year 2018-2019
1. Final year students Lokeshwaran K, Kaushik Kumar M won I Prize in Paper
Presentation organized by AMCET, on 27.09.2019.
2. Final year student Umar Farooque M won II Prize in Rubik’s Cube organized by
AMCET, on 27.09.2019
.
3. Final year students Lokeshwaran K won I Prize in Aqua Rocket competition organized
by GRT, on 14.09.2019.
4. Final year students Lokeshwaran K, Muthu Kumaran E won I Prize in Paper
Presentation organized by GRT, on 14.09.2019
5. Final year students Manikandan S, Harishkumar S participated in Water Rocketry,
Technical Quiz & Treasure Hunt organized by AMCET, on 27.09.2019.
6. Final year students Pavithran P, Suresh P participated in Water Rocketry, Technical
Quiz, Memes Onspot & Rubik’s Cube organized by AMCET, on 27.09.2019.
7. Final year students Prithivinathan A, Prabakaran S participated in Water Rocketry
organized by AMCET, on 27.09.2019.
8. Final year students Manimaran.D, Mohammed Sufiyan T.L, Matheeur Rahman K
won III Prize in Paper Presentation organized by MIT, Chennai on 28.09.2018.
9. Third year students Lokeshwaran K, Kaushik Kumar M won I Prize in Aqua Rocket
competition organized by AMCET, on 01.10.2018.
10. Final year students Mohammed Sufiyan T. L, Matheeur Rahman K won I Prize in
Technical Quiz organized by AMCET on 01.10.2018.
11. Final year students Mithun Chander R won I Prize in Treasure Hunt organized by
AMCET on 01.10.2018.
12. Final year students Monish R, Mohammed Nayeem S won II Prize in Technical Quiz
organized by AMCET on 01.10.2018.
13. Final Year Students visited “Bharat Heavy Electricals Limited (BHEL)” Ranipet, on
28.07.2018.
14. Third year Students visited “M/S. P. Chandru Machine Tools”, Vaduganthangal,
Vellore on 21.07.2018 and 28.07.2018.
Academic Year 2019-2020
1. Final year students Lokeshwaran K, Kaushik Kumar M won I Prize in Paper
Presentation organized by AMCET on 27.09.2019.
2. Final year student Umar Farooque M won II Prize in Rubik’s Cube organized by
AMCET, on 27.09.2019.
3. Final year student Lokeshwaran K won I Prize in Aqua Rocket competition organized
by GRT on 14.09.2019.
4. Final year students Lokeshwaran K, Muthu Kumaran E won I Prize in Paper
Presentation organized by GRT on 14.09.2019.
5. Final year students Manikandan S, Harishkumar S participated in Water Rocketry,
Technical Quiz & Treasure Hunt organized by AMCET on 27.09.2019.
6. Final year students Pavithran P, Suresh P participated in Water Rocketry, Technical
Quiz, Memes Onspot & Rubik’s Cube organized by AMCET on 27.09.2019.
7. Final year students Prithivinathan A, Prabakaran S participated in Water Rocketry
organized by AMCET on 27.09.2019.
Academic Year 2021-2022
1. Syed Aaqib Ahmed A and Rohith S, Second Year Students presented a paper titled
“Experimental Investigation of Partially Charged CI Engine and Fuelled with
Hydrogen (HHO) and Diesel National Conference on Advance in Mechanical
Engineering, “NCAME-22” organized by Department of Mechanical Engineering,
Velammal Engineering College, Chennai-66 on 20.05.2022.
2. Final Year Student Sakthivel participated in Two Days Workshop on “Shop Weld
2021” organized by Department of Mechanical Engineering, CAHCET, Melvisharam
on 17.09.2021 to 18.09.2021.
3. 64 Mechanical Engineering Students participated in Two Days Workshop on
“Automotive Technology” organized by Department of Mechanical Engineering,
CAHCET, Melvisharam on 07.10.2021 to 08.10.2021.
4. 39 Mechanical Engineering Students participated in Three Days Workshop on “3D
Printing Technology” organized by Department of Mechanical Engineering,
CAHCET, Melvisharam on 11.10.2021 to 13.10.2021.
Academic Year 2022-2023
1. Third year student Prasanth R has secured III Position in “LATHE-IT-OFF” event at
“SYNERGY 2023” organized by NIT Trichy on 26.02.2023.
2. Third year student Prasanth R has secured II Position in “MACHINING” event at
“MECHFLAREZ 2023” organized by Jappiaar Engineering College on 10.03.2023.
3. 21 Mechanical Engineering Students participated in One Day Value Added Course on
“MASTERCAM Software” organized by Department of Mechanical Engineering,
CAHCET, Melvisharam on 15.09.2022.
4. 36 Mechanical Engineering Students participated in One Day Workshop Cum Hands
on Training On “Innovation in Robotics” organized by Department of Mechanical
Engineering, CAHCET, Melvisharam on 23.09.2022.
Academic Year 2023-2024
1. Final year student Mouleswaran S successfully completed Online Training on “BASIC
LIFE SUPPORT & FIRST AID” Program Organized by AICTE on 29.07.2023.
2. Third Year Students Mohammed Hasan A M and Siddiq Ibrahim M participated in
Two Days Workshop on “Application of Artificial Intelligence and Machine Learning
In Condition Monitoring For High Voltage Assets” AIMCoM-2023 at VIT Vellore, on
08.09.2023 and 09.09.2023.
3. Third year student Dhanush S has secured II Position in “CADD Modelling” event
held during National Level Technical Symposium “KRIVOSHIP 23” on 29.09.2023 at
Annai Mira College of Engineering and Technology, Vellore.
4. Final Year Student Mouleswaran S successfully completed Online Workshop on
“Monitoring Forest Disturbances Using Geo-Spatial Technology” Program Organized
by Indian Institute of Remote Sensing, Indian Space Research Organisation,
Department of Space, Government of India, IIRS Nodal Centre, VIT, Vellore on
04.10.2023.
5. Third year student Dhanush S has secured II Position in “CADD Modelling” event
held during National Level Technical Symposium “IGNITO 23” on 27.10.2023 at
Global Institute of Engineering and Technology, Melvisharam.
6. Final year students Afroze Ahmed S, Prasanth R and Sheik Ibrahim has secured II
Position in “CONNECTION” event held during National Level Technical Symposium
“IGNITO 23” on 27.10.2023 at Global Institute of Engineering and Technology,
Melvisharam.
7. Final year students Sheik Ibrahim, Afroze Ahmed S and Prasanth R secured I, II
and III Position in “QUALITY CHECK” event held during National Level Technical
Symposium “IGNITO 23” on 27.10.2023 at Global Institute of Engineering and
Technology, Melvisharam.
8. Final year students Sheik Ibrahim, Prasanth R secured I and II Position in
“IDENTIFY THE PIC” event held during National Level Technical Symposium
“IGNITO 23” on 27.10.2023 at Global Institute of Engineering and Technology,
Melvisharam.
9. Final year students Prasanth R has secured I Position in “CADD MODELLING” event
held during National Level Technical Symposium “IGNITO 23” on 27.10.2023 at
Global Institute of Engineering and Technology, Melvisharam.
10. 29 Third and Final Year Mechanical Students are Attended Short Course “Additive
Manufacturing and Laser Powder Bed Fusion Process Flow” held at VIT, Vellore on
11.10.2023.
11. Final year Mouleswaran S successfully completed online course on “Overview of
Geographical Information System” Program Organized by Indian Institute of Remote
Sensing, Indian Space Research Organisation, Department of Space, Government of
India, IIRS Nodal Centre, VIT, Vellore on 09.10.2023 to 27.10.2023.
12. Final year Mouleswaran S Participated in Workshop on “AI Based Charging
Infrastructure for Sustainable E-Mobility” at VIT, Vellore on 08.01.2024 and
09.01.2024.
13. Third and Final Year Students Dinesh R, Khizhar Hussain A, Mohammed
Muzammil P and Mouleswaran S Participated in One Day Workshop On “Advanced
Laser Applications in Manufacturing and Material Processing” Held on 27.01.2024 at
College of Engineering Guindy, Anna University, Chennai-25.